For contractors

Send the drawing.The quote is free.

A simple CAD drawing is normally priced back the same day. Large or complex packages: design fee, or on contract.

Aluminium gates, fencing and pavilions, cut and finished in Hefei to your opening. The present company has been making gates since 2005.

The works, photographed

Our own floor in Hefei, on a phone, unstyled.

The works seen from the yard
A worker in a mask welding a cast ornamental panel into an aluminium gate frame laid flat on the bench, lit by the arc.
A worker finishing a black gate leaf laid on trestles, its cast ornaments picked out in gold, with more gate parts stacked behind.
Address
Hefei · Anhui · China
Video walk on request — any station.
Qualification
National High-Tech Enterprise, 2023
Done in this building
Cutting · welding · grinding · assembly · finishing
Profile and castings bought in — profile from Anhui Guangyin Aluminium. Not extruded here.
Patents
2019220598961 · 2020301650408 · 2020301650427 · 2020301656669 · 2020301656705
CNIPA · check by number

The numbers to plan against

Confirmed in writing.

Parameter FigureDecides
Catalogue 65 designs 25 gates · 31 fencing · 9 pavilionsIf your spec is already drawn
Minimum order None. One set ships; series mix freely in one container.Whether one opening is enough
Alloy and section 6063-T5 primary aluminium · 3.0 mm wall on the gate frame Material schedule line
Powder coating TIGER Coatings, Austria · 80–100 μm film, exterior super-durable grade. Rated by the works: 10–15 years without fading, 30 years on the welded structure.Finish schedule line
Indicative rate Gates ¥800–2,000 / m² ≈ US$110–280 · Fencing ¥150–500 / m² ≈ US$21–69 · Pavilions ¥1,500–5,000 / m² ≈ US$210–695 Indicative · product only · converted at ¥7.2 = US$1 · the written quotation is the priceBudget order of magnitude
Incoterms EXW and DDP. EXW preferred; DDP to any address you give us.Who books the freight
Non-standard work Any structure that stands up. Too large for sea freight is jointed on site.How the opening splits
Technical pack A PDF data sheet per design, on request. Your submittal
Supplied with Complete product, fixings in the crate. Motor and locks extra, not in the rates.Who fits it
Largest single leaf 7 m × 4 m upper limit built to date, rarely asked forWhere one leaf becomes two
Monthly capacity 1,000 m² of gates or 5,000 m of fencing one or the otherWhether your programme fits
Sets per 40 ft container Depends on size and quantity — worked out per order. Freight per set

Before you message

Three dimensions, and the first reply can carry a price.

W STRUCTURAL OPENING H LEAF HEIGHT G C/L — LEAF SPLIT
  1. W

    Structural opening

    Clear between the piers, at head, middle and floor. Send the smallest.

  2. H·G

    Leaf height and ground gap

    From finished level, not as it stands. Flag any fall across the opening.

  3. C/L

    Leaf split and swing

    Single leaf, double leaf or sliding — and which side takes the hinge.

A fourth line, if it applies
Rake, curve, stepped ground, out-of-square pier, arched head. No size here is standard.
If there is no drawing yet
Three dimensions and a photograph of the opening are enough to start.

Country, product, contractor — that starts the quote. Opening and quantity turn it into a price.

A dark blue double-leaf aluminium gate installed between rendered piers with globe lamps, horizontal slats below and a laser-cut branch pattern above, on a brick-paved driveway.
Installation photograph supplied by the works
Enquiry route
Contractor
Country, product, contractor — that starts the quote. Opening and quantity turn it into a price.
WhatsApp
+86 173 1854 7857
Normally answered within minutes · Hefei is UTC+8

Send the drawings and get a line-by-line quote.

Not this door?Distributors Homeowners Contact