Modular Aluminium Fencing Made for Trade Projects
Fence panels, posts and matching gates made to your drawings or opening sizes. Argent Gates supplies distributors and contractors from our factory in Hefei, China, with technical files, mixed-order options and export packing prepared for each project.
Request a Project Quote View Fence Designs
What modular aluminium fencing means
A modular fence separates the boundary into repeatable panels, posts and connection points. The layout is checked against the opening before production, so a distributor can build a range and a contractor can plan installation around measured sections rather than treat every metre as a new design.
The final connection method, panel width, post section and fixing detail are confirmed on the project drawing. We do not publish one universal section because wind exposure, ground conditions, privacy level and local installation practice change the specification.
Choose the fence format
Vertical Slat Fencing
Clean vertical lines for residential boundaries, entrances and matching gate runs. Ten designs are currently listed in the catalogue.
Louvre Privacy Fencing
Angled blades reduce the direct sightline while retaining gaps between the blades. Eleven designs are currently listed in the catalogue.
European Classic Fencing
Decorative aluminium fencing with cast details that can be coordinated with matching gates. Ten designs are currently listed in the catalogue.
Built to the project drawing
Send the overall run, panel heights, post positions, gate openings and any change in ground level. If a drawing is not ready, photographs and basic measurements are enough to begin the first check.
Information needed for a checked quotation
- Delivery country and postcode or port.
- Total fence length and required height.
- Preferred design or reference photograph.
- Number and size of pedestrian, swing or sliding gates.
- Ground conditions, corners, steps or sloping sections.
- Quantity, project programme and preferred trade terms.
Material and finishing evidence
The published factory record states that the current gate and fencing range uses primary 6063-T5 aluminium profile. Profile is bought in and fabrication is completed in the Hefei works through cutting, welding, grinding, assembly and surface finishing.
The factory page lists TIGER exterior powder coating and a measured film-thickness range of 80–100 μm. A technical data sheet and Chinese third-party coating and material test reports are available on request.
See the manufacturing process Request technical documents
For distributors
Build a range from vertical slat, louvre privacy and decorative fence designs, then add matching gates where the project requires them. The current public terms state that there is no minimum order and that different series may be mixed in one container. Final quantities, packing dimensions and freight are calculated for the actual order.
For contractors
Send a drawing, bill of quantities or measured openings. We check the layout, identify the information still needed and return a project quotation. Fixing details and section sizes are confirmed in the approved drawing rather than assumed from a catalogue image.
Packing and delivery
Each order is packed for its actual mix of panels, posts, gates and fittings. The number of panels per crate and per container depends on panel size, post length, quantity and the final packing method. These figures are issued with the quotation after the layout is checked.
EXW and DDP are currently offered, with EXW preferred. Delivery arrangements are confirmed in writing for the destination supplied in the enquiry.
From measurements to shipment
- Send the layout: drawing, dimensions, quantity and destination.
- Technical check: panel divisions, posts, gates, finish and connection details.
- Drawing and quotation: specification, price and trade terms issued for review.
- Production: cutting, welding, grinding, trial assembly and finishing in Hefei.
- Packing: components and fittings checked against the order before shipment.
Frequently asked questions
Can you make non-standard fence panel sizes?
Yes. The range is made to project drawings or measured openings. Final panel divisions and post positions are confirmed on the approved drawing.
Is this a knock-down aluminium fence system?
Modular and knock-down configurations can be assessed for the project, but the exact connection method must be confirmed on the drawing. We do not claim one connection detail for every fence design.
Can gates and fencing ship in the same order?
Yes. The current factory terms allow different product series to be mixed in one container. The loading quantity depends on the final sizes and packing plan.
What information do you need for a quote?
Send the delivery location, total length, height, preferred design, gate openings and quantity. Drawings or a bill of quantities help us check the project faster.
Do you provide technical documents?
A technical data sheet is available on request. Chinese third-party coating and material test reports can also be requested through the technical resources page.
Do you supply Australia, Canada and Western Europe?
These are target export markets for trade enquiries. Product suitability, delivery terms and any local project requirements are reviewed against the actual destination and specification.
Send the fence run. Get a checked specification and quote.
Include the country, total length, height, design reference and gate openings. We will tell you what is still needed before production is discussed.